• RONATEC NIS is a non-cyanide alkaline stripper that dissolves electroless nickel deposits from steel, copper and copper alloys.
• No Fe substrate attack
• No Brass or Copper substrate attack
• High stripping speed
• Cyanide Free Process
• Long-life-Up to 4 oz/gal (30 g/liter) Nickel Metal

ZINCATE 50 is a cyanide-free dilute zincate process for processing aluminum and its alloys. It removes aluminum oxide and applies a thin zinc film on the aluminum alloy by immersion to prevent its re-oxidation. This film can then be electroplated with copper, nickel and certain other electrolytic processes as well as with electroless nickel. The dilute ZINCATE 50 solution has low viscosity that rapidly penetrates the water film present on the cleaned aluminum. This new alloy process produces a denser, more uniform zinc film that improves adhesion to the aluminum, helping to insure excellent adhesion of the subsequent plate. This unique zincate film cannot be found with most other conventional zincates.

The RoHS EN 1012 produces a high phosphorous electroless nickel deposit at elevated plating rates (0.40.6 mil per hour). This solution is ideal for critical high volume applications. Connector and Oil and Gas applications are common. The 1012 is also suitable for aerospace hardware.

RoHS EN 1012 deposits meet specification requirements of ASTM B733, AMS 2404, AMS-26074 (formerly Mil-C-26074), ISO 4527 and RoHS Directive 2002/95/EC.

Ronatec RoHS EN CSB is a semi brite, medium phosphorous electroless nickel process developed to meet the requirements of the electrical connector industry. The deposit is more ductile than a standard, bright medium phosphorous process. This chemistry is suitable for extremely high build applications as well.

EN 1000 is specifically formulated to produce a bright, medium phosphorous, electroless nickel deposit. The system is an excellent high speed production bath offering a 0.7 mil/hr or more rate of deposition over a wide range of solution loading for both rack or barrel applications. The resulting deposit is RoHS compliant and is in accordance with the requirements of REACH.

EN 1000 meets end use requirements of AMS 2404, Mil-C-26074, Mil-C-38999, and BAC 5728, DPS 9.67.

Ronatec C2C has a complete line of stripping products designed for the most demanding stripping challenges found in the metal finishing industry. We have made a commitment to improve and refine current technology as well as research and develop new ideas in stripping that are faster, more effective and more environmentally friendly.

Ronatec C2C makes its own as well as distributes multiple cleaners for pretreatment and in-process applications.

Ronatec C2C knows that the most important factors in the buffing process are achieving a smooth, clean surface and protecting the metal. These can be achieved only by using the highest quality compounds. Ronatec uses only the highest quality materials from all over the world for our buffing compounds.